Max.Voc：145V；Rated input voltage：110/120V
HFP series is a new all-in-one hybrid solar charge inverter, which integrates solar energy storage & means charging energy storage and AC sine wave output.
Hybrid Solar Inverter Parallel-able ( Split Phase/Three phase ) HFP4835U80-145
Description
PV Solar Power Inverter HFP4835U80-145
1. It adopts full-digital double closed loop control, combined with advanced SPWM technology to output pure sine wave.
2. Two output modes: mains electricity bypass and inverter output; uninterrupted power supply.
3. Four charging modes: PV Only, Mains Electricity Priority, PV Priority and PV&Mains Electricity hybrid charging.
4. Advanced MPPT technology with 99.9% efficiency.
5. User-defined charging parameters setting(voltage, current and mode), and suitable for various types of energy storage batteries.
6. Rocker switch for AC output control.
7. Power saving mode, reduce no-load loss.
8. Intelligent variable-speed fan to efficiently dissipate heat and extend system lifespan.
9. Lithium battery activation function, allow lead-acid battery and lithium battery access.
10. All-round protection for solar panels includes overload and short circuit protection, under-voltage and over-voltage protection and reverse polarity protection.
11. Support variety of user-friendly communication modules, such as RS485(GPRS, WiFi, Bluetooth), CAN and USB etc., and feasible to connect with computer and mobile phone to realize remote control.
12. Available for 6 units parallel operation.
| Models | HFP4835U80-145 |
| AC mode | |
| Rated input voltage | 110/120Vac |
| Input voltage range | (90Vac-140Vac)±2% |
| Frequency | 50Hz/ 60Hz (auto-sensing) |
| Overload/short circuit protection | Breaker |
| Efficiency | >91% |
| Conversion time (bypass and inverter) | 10ms (Typical value) |
| AC reverse protection | yes |
| Maximum bypass overload current | 40A |
| Inverting mode | |
| Output voltage waveform | Pure sine wave |
| Rated output power(VA) | 3500 |
| Rated output power(W) | 3500 |
| Power factor | 1 |
| Rated output voltage (Vac) | 120Vac |
| Output voltage error | ±5% |
| Output frequency range (Hz) | 50Hz ± 0.3Hz/60Hz ± 0.3Hz |
| Efficiency | >92% |
| Peak power | 10000VA |
| Loaded motor capacity | 2HP |
| Output short-circuit protection | Breaker |
| Specification of bypass breaker | 40A |
| Rated battery input voltage | 48V (minimum start voltage 44V) |
| Battery voltage range | 40.0Vdc~60Vdc ± 0.6Vdc (undervoltage alarm/turnoff voltage/overvoltage alarm/overvoltage restoration…settable LCD screen) |
| Power saving mode AC charge | Load ≤25W |
| Battery type | Lead acid or lithium battery |
| Maximum charge current | 40A |
| Charge current error | ± 5Adc |
| Charge voltage range | 40 –58Vdc |
| Short-circuit protection | Circuit breaker and blown fuse |
| Breaker specification | 40A |
| Overcharge protection | Alarm and turn off charging after 1 minute |
| Solar charge | |
| Maximum PV opencircuit voltage | 145Vdc |
| PV operation voltage range | 60-145Vdc |
| MPPT voltage range | 60-115Vdc |
| Battery voltage range | 40-60Vdc |
| Maximum output power | 4400W |
| Charge current range of solar energy (settable) | 0-80A |
| Charge short-circuit protection | Blown fuse |
| Wiring protection Authentication specification | Reverse polarity protection |
| Specification authentication | CE(IEC/EN62109-1,-2)、ROHS2.0 |
| EMC authentication grade | EN61000 |
| Operation temperature range | -15°C to 55°C |
| Storage temperature range | -25°C ~ 60°C |
| Humidity range | 5% to 95% (Conformal coating protection) |
| Noise | ≤60dB |
| Thermal dissipation | Forced air cooling, variable speed of fan |
| Communication interface | USB/RS485(Bluetooth/WiFi/GPRS)/Dry node control |
| Dimension (L*W*D) | 430mm*338mm*126mm |
| Weight (kg) | 10 |
User Manuel :HFP48-145 User Manuel
Datasheet：HFP48-145-Datasheet
FAQ:
Q1: What kind of certificates you have for your solar controllers ?
SRNE:Our solar controller has CE,ROHS,ISO9001 certificates approved.
Q2: Are you a manufacturer or trading company?
SRNE:We are a state-level high-tech enterprise that integrates pluralism, R&D and manufacturing as one with PV controller,PV inverter,PV energy storage oriented.And we have our own factory.
Q3: Can I buy one sample for testing?
SRNE:Sure,we have a 8 years experience R&D team and in timely after sale service,can help u fix any technicial problem or confusion.
Q4: How are about the delivery?
SRNE:Sample:1-2 working days
Order: within 7 working days depending on the order quantities
OEM Order:4-8 working days after confirming the sample
Q5: How're about your customers service?
SRNE:All solar controllers will be tested strictly one by one before leaving factory,And the defective rate is below 0.1%.we do try our best to provide a good customer service.
Q6:Minimum Order Quantity?
SRNE:Be equal or greater than 1 piece.
