Solar charge inverter HFP4850S80

Home|Solar Charger Inverter|Solar charge inverter HFP4850S80

Solar charge inverter HFP4850S80

HF48 series is a new hybrid solar charge inverter, which integrates solar energy storage &means charging energy storage and AC sine wave output. 

Thanks to DSP control and advanced controlalgorithm, it has high response speed, high reliability and high industrial standard.

Description

All-in-one solar charger inverter HFP4850S80

1. It adopts full-digital double closed loop control, combined with advanced SPWM technology to output pure sine wave.
 
2. Two output modes: mains electricity bypass and inverter output; uninterrupted power supply.
 
3. Four charging modes: PV Only, Mains Electricity Priority, PV Priority and PV&Mains Electricity hybrid charging.
 
4. Advanced MPPT technology with 99.9% efficiency.
 
5. User-defined charging parameters setting(voltage, current and mode), and suitable for various types of energy storage batteries.
 
6. Rocker switch for AC output control.
 
7. Power saving mode, reduce no-load loss.
 
8. Intelligent variable-speed fan to efficiently dissipate heat and extend system lifespan.
 
9. Lithium battery activation function, allow lead-acid battery and lithium battery access.
 
10. All-round protection for solar panels includes overload and short circuit protection, under-voltage and over-voltage protection and reverse polarity protection.
 
11. Support variety of user-friendly communication modules, such as RS485(GPRS, WiFi, Bluetooth), CAN and USB etc., and feasible to connect with computer and mobile phone to realize remote control.
 
12. Available for 6 units parallel operation.

Models

HFP4850S80

AC mode

 

Rated input voltage

220/230Vac

Input voltage range

(170Vac~280Vac) ±2%/(90Vac-280Vac)±2%

Frequency

50Hz/ 60Hz (auto-sensing)

Parallel connection

Frequency Range

Available for 6 units parallel connection

47±0.3Hz ~ 55±0.3Hz (50Hz)/57±0.3Hz ~ 65±0.3Hz (60Hz);

Overload/short circuit protection

Breaker

Efficiency

>95%

Conversion time (bypass and inverter)

10ms (Typical value)

AC reverse protection

yes

Maximum bypass overload current

40A

Inverting mode

 

Output voltage waveform

Pure sine wave

Rated output power(VA)

5000

Rated output power(W)

5000

Power factor

1

Rated output voltage (Vac)

230Vac

Output voltage error

±5%

Output frequency range (Hz)

50Hz ± 0.3Hz/60Hz ± 0.3Hz

Efficiency

>90%

 

Overload protection

(102% (125%; Load>150% ±10%: reporting error and turn off the output after 5 seconds;

Peak power

10000VA

Loaded motor capacity

4HP

Output short-circuit protection

Breaker

Specification of bypass breaker

40A

Rated battery input voltage

48V (minimum start voltage 44V)

Battery voltage range

40.0Vdc~60Vdc ± 0.6Vdc (undervoltage alarm/turnoff voltage/overvoltage alarm/overvoltage restoration…settable LCD screen)

Power saving mode

AC charge

Load ≤25W

Battery type

Lead acid or lithium battery

Maximum charge current

60A

Charge current error

± 5Adc

Charge voltage range

40 –58Vdc

Short-circuit protection

Circuit breaker and blown fuse

Breaker specification

40A

Overcharge protection

Alarm and turn off charging after 1 minute

Solar charge

 

Maximum PV opencircuit voltage

145Vdc

PV operation voltage range

60-145Vdc

MPPT voltage range

60-115Vdc

Battery voltage range

40-60Vdc

Maximum output power

4200W

Charge current range of solar energy (settable)

0-80A

Charge short-circuit protection

Blown fuse

Wiring protection

Authentication specification

Reverse polarity protection

Specification authentication

CE(IEC/EN62109-1,-2)、ROHS2.0

EMC authentication grade

EN61000

Operation temperature range

-15°C to 55°C

Storage temperature range

-25°C ~ 60°C

Humidity range

5% to 95% (Conformal coating protection)

Noise

≤60dB

Thermal dissipation

Forced air cooling, variable speed of fan

Communication interface

USB/RS485(Bluetooth/WiFi/GPRS)/Dry node control

Dimension (L*W*D)

430mm*338mm*126mm

Weight (kg)

10

solar charger inverter Authentications

FAQ:

Q1: What kind of certificates you have for your solar controllers ?

SRNE:Our solar controller has CE,ROHS,ISO9001 certificates approved.

Q2: Are you a manufacturer or trading company?

SRNE:We are a state-level high-tech enterprise that integrates pluralism, R&D and manufacturing as one with PV controller,PV inverter,PV energy storage oriented.And we have our own factory.

Q3: Can I buy one sample for testing?

SRNE:Sure,we have a 8 years experience R&D team and in timely after sale service,can help u fix any technicial problem or confusion.

Q4: How are about the delivery?

SRNE:

Sample:

1-2 working days

Order: within 7 working days depending on the order quantities

OEM Order:4-8 working days after confirming the sample

Q5: How're about your customers service?

SRNE:All solar controllers will be tested strictly one by one before leaving factory,And the defective rate is below 0.1%.we do try our best to provide a good customer service.

Q6:Minimum Order Quantity?

SRNE:Be equal or greater than 1 piece.

        

        

    Contact Us